2.7inch e-Paper E-Ink Display HAT For Raspberry Pi (264x176)

£20.99 GBP Sale

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with an embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra-low power consumption, wide viewing angle, the great effect under sunlight, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.

Features
  • No backlight keeps displaying last content for a long time even when power down
  • Ultra-low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Onboard 4x Keys
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications

Key Parameters:

Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 85mm × 56mm
Display size: 57.288mm × 38.192mm
Dot pitch:   0.217 × 0.217
Resolution:   264 × 176
Display colour: Red, Black, White
Grey level:  2
Full refresh time: 15s
Refresh power: 26.4mW(type.)
Standby power: <0.017mW
Viewing angle: >170°

Interface:

SYMBOL DESCRIPTION
VCC 3.3V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
Kit Content
  • 1 x 2.7inch e-Paper HAT (B)
  • 2 x RPi screws pack (2pcs)
  • 1 x PH2.0 20cm 8Pin
Go to full site