Here you'll find links to all the currently available resources for the SPi-Box.
Note: These steps are only necessary if you have not got a pre-loaded SPi-Box microSD card from SB Components or if you need to reformat your microSD card for any reason.
/home/pi/spibox
/home/pi/spibox/capture
/home/pi/spibox/capture/archive
Open up a LXTerminal session and enter:
sudo raspi-config
Use the arrow keys to move down to "5 Enable Camera" and press Enter/Return and select <enable>
Back on the main config page use the arrow keys to move down to "8 Advanced Options" and press Enter/Return
Use the arrow keys to scroll down to "A4 SSH" and press Enter/Return and select <enable>
Open up a LXTerminal session and type:
sudo apt-get update sudo apt-get install ssmtp sudo apt-get install mpack sudo apt-get update
At a command prompt enter:
sudo nano /etc/ssmtp/ssmtp.conf
Change the lines:
mailhub=[your smtp server or smtp.gmail.com:587 if using a gmail account] FromLineOverride=YES AuthUser=[yourEmail@address] AuthPass=[your email address password] UseSTARTTLS=YES
Close the file, saving your changes.
At a command prompt type:
sudo nano /boot/config.txt
And add the following line to the file:
disable_camera_led=1
Close the file saving your change.
At a command prompt enter:
sudo nano /etc/passwd
Edit the line beginning "root" to be:
root:x:0:0:SPIBOX:/root:/bin/bash
Close the file saving your change.
At a command prompt enter:
crontab -e
Add the following line to the end of the file:
@reboot sudo python /home/pi/spibox/spiboxmessenger.py &
Close the file, saving your change.
Having a Raspberry Pi is not enough, but you should take care of it as your new Raspberry Pi can get damaged, either in a physical way or through electrostatic discharge. Wondering how can you do this? No need to put pressure on your mind as the cool and appealing cases for Raspberry Pi is available to protect it.
Cases – Affordable way to protect your Raspberry Pi
Raspberry Pi cases are not only a cost-effective way to provide protection to it from dust and damage, but also available in pretty and trendy designs. Within the case, you can enclose your tiny-size computer properly and it will add a style to your Pi. With the growing popularity, the Raspberry Pi cases are available for all models – from Raspberry Pi zero to Raspberry Pi 3 model B+.
When you start to find the case, take care that you are purchasing the appropriate case for your model. Over the last few years, significant changes to the Raspberry Pi board have been made that includes movement and entire elimination of certain ports. It means that older cases are not suitable for newer models.
SB Components – Recommended supplier to buy Raspberry Pi case
SB Components, a popular supplier that sells everything essential for Raspberry Pi and caters a vast array of cases. With them, you will discover the functional, robust and elegant cases in the highest quality and at a pocket-friendly price. With the availability of a variety of colors, sizes and shapes of cases, you will definitely find the right case for your Raspberry Pi. So, visit the website of SB Components for searching the case that is the best fit for your tiny computer.
]]>Here is a short guide that will let you know the things which you should understand about each model of Raspberry Pi.
The 3 Generations of Pi
As you may know, different kinds of the Raspberry Pi are available since its launch date. But all the models are separated into three types:
Model A: Came first in existence in 2013 and its iteration “A+” appeared in 2014.
Model B: First appeared in April 2012, a “+” model means B+ released after two years in July 2014. After passing few months, the Raspberry Pi 2 came into existence in February 2015. This was followed by the Raspberry Pi 2 v1.2 in October 2016. In this meantime, Raspberry Pi 3 came in February 2016.
Zero: Lastly, the Raspberry Pi Zero board appeared in November 2015, a smaller version of Pi’s family. It was thriving by Zero PCB ver1.3 in May 2016. A third model, Zero W hit the market in February 2017, while its latest board Zero WH uncovered in the beginning of 2018.
However, three generations of Pi are available, but you can currently purchase only their subset. Continue your reading to discover their details, specifications and usage.
Raspberry Pi 1 Model A+
Available with size 65mm x 56.5mm x 10mm and weight 23gms, the RaspberryPi model A+ is a improved iteration of the model A. Smaller in size in comparison to its predecessor, it utilizes the instruction set of ARMv6Z (32-bit) along with a Broadcom BCM2835 System-on-a-chip (SOC). This consists a 700MHz single-core ARM1176JZF-S and RAM of 512MB.
Along with this, it has a 15-pin MIPI Camera Serial Interface (CSI) connector and 1 USB 2.0 port. For LCD panels, this device is provided with a MIPI display interface, while composite audio and video output is handled by 3.5mm TRRS jack. You will also find a standard HDMI-out on the board. The model A+ also features a micro SD card slot.
The specifications are not limited to these only as there is an availability of 40-pin array – 28 for GPIO, and the remaining ones are for UART, 12C and SPI.
Ideal Use: Due to its limits, this model is perfect as a motion sensing security camera. Also best for a NAS controller, robot brain and even at the high altitude balloon’s heart.
Raspberry Pi 1 Model B+
By carrying the same architecture and SoC of model A+, the Raspberry Pi model B+ comes with a larger size of 85.6mm x 56.5mm, allowing space for additional connectivity. This model comprises 4 USB 2.0 ports. However, this is through the five-port, on-board USB hub – the fifth one is available for an Ethernet port.
Similar to model A+, it is mounted with a 15-pin MIPI camera interface connector and also provided with the MIPI display interface for raw LCD panels.
This model is first in Pi’s family that provides a microSDHC slot for high speed microSD cards.
Ideal Use: With this model of Pi, you can easily run on a low level server. For instance, network monitoring tool or a wireless point server.
Raspberry Pi 2 Model B
With the same dimensions and weight of B+, Raspberry Pi 2 Model B is launched by stepping up the hardware.
Now made to the ARMv8-A (64/32-bit), this model comprises a 900MHz 64-bit quad-core ARM Cortex-A53 along with a Broadcom BCM2837 SoC and a 1GB of RAM. Apart from this, there are no other dissimilarities with B+, but the increased RAM and a faster CPU boost the performance.
Ideal Use: Can be used for numerous projects like an inspiring digital picture frame. Due to its versatility, you can use it as a desktop computer. Also, this device is used to install and run Doom without emulation.
Raspberry Pi 3 Model B
Enhancing the specifications of the model B design and having the same weight and dimensions, Raspberry Pi 3 Model B consist a 1.2GHz 64-bit quad core ARM Cortex-A53. Also comprises an enormous USB resource boost and 802.11n wireless and Bluetooth 4.1 on-board.
This means that there will be no interruption in the flow of power to these devices and near about two USB ports are available for other tasks. Along with this, it has microSDHC- compatible card slot.
Ideal Use: Pretty for every project that is not restricted by size. Because of the most powerful version, this model is best for retro gaming emulation and can be used as a Kodi box.
Raspberry Pi Zero
Available in lightweight and in half of the size of B+, this powerful computer is not limited by its size. This model built into the 32-bit ARMv6Z architecture along with a Broadcom BCM2835 SoC that you found in the model A and B+.
Constructed with a 1GHz single-core ARM1176JZF-S CPU, this model shared 512MB RAM and has 1.3 revision boards as well as the MIPI camera interface. Comprising micro USB for power and another for data, this model has microSD and mini HDMI-out. However, GPIO pins have been removed, but there is an array along with Run and TV I/O.
Having 65mm x 30mm x 5mm size and weight 9gms, Pi Zero is best for any project where weight and space are a premium. Maybe, it is smaller than the previous versions of Raspberry Pi, but can be used very easily.
Raspberry Pi Zero W
Undoubtedly, Raspberry Pi Zero was the best board, but its limited USB connectivity becomes somewhat tricky for connecting devices or getting online. Raspberry Pi Zero W was launched with the addition of Bluetooth and wireless connectivity to the Pi Zero.
This model is best for executing a compact project for which you need remote access also.
Raspberry Pi Zero WH
Similar to the previous board, this version of the Pi Zero’s family comes with one primary difference – it comprises GPIO pins. Therefore, this model is perfect for anyone who do not like soldering, but require a Pi Zero because of space limitation.
Ideal Use: All the models of Pi Zero are perfect for any project where space is a premium. For example, you can use it to run the retro gaming projects.
Other Flavours of the Raspberry Pi
With the availability of standard models, the Raspberry Pi Foundation has launched other versions also. Here we are talking about the Compute Module that has an IO breakout board and three iterations. These devices come with the same specifications that you found in the main Pi’s, but are meant for the Internet of Things developers. However, these can be brought by the enthusiasts also.
Which Raspberry Pi should you buy?
Unarguably, all of these Raspberry Pi models are ideal for performing specific tasks. But their flexibility made them capable of swapping. Here the meaning is that you can send a balloon into orbit by using Raspberry Pi 3 and you can run Kodi on a Pi Zero.
So, choose the version of Raspberry Pi that perfectly suits to your project.
Right Source to Buy
SB Components Ltd as it is an ideal destination to buy the best products without placing any burden on your pocket. The Company is offering a vast range of products that range from accessories to stylish and robust Raspberry Pi.
]]>Here are some cool projects that you must go through that will let you know where you can use Raspberry Pi and how to explore them.
Raspberry Pi is a great platform for Tech enthusiasts/students/beginners/researchers to explore it their way. What makes it more special it is easy to use apps, affordability and compact size that makes it easy to handle and use it anywhere. Today people are doing lots of experiments on it & making some really cool stuff which is actually helpful in STEM Education and gives you the liberty to explore it further.
These projects on Pi are really helpful in learning programming languages like PHP, Python, C/C++ and a lot more. Playful learning is considered the best learning and this is where Pi Based learning or projects take an edge over the other tech-based projects. One can play with these projects their way and learn a lot or try their hands on different languages and projects.
Some of the projects on Raspberry Pi are listed below. These Products are helpful for makers, students, children and tech enthusiasts to explore them and find opportunities.
Projects on Raspberry Pi
So, let’s take a quick glance at some of Pi based projects with a brief description:
Do you want to make your home smarter? Now you can control your home appliances by just sending the SMS using your phone. PiTalk is a 3G GSM Module to handle the incoming messages and PiRelay is a relay module for Raspberry Pi controls your home appliances. You just need to connect your PiTalk and PiRelay to Raspberry Pi to make your home appliances smarter.
We have seen many robots in movies. But you can make your own robots and by attaching camera into it, we can easily make a surveillance robot. We just need a motor driver board i.e. Motor Shield. Motor shield gives you access to control up to 4 DC motors and 2 Stepper Motors.
3. Dancing LED Lights:
You can make dancing lights using PiCube. Three Dimensional LED Cube gives you access to learn how to play with LED. You can make any patterns by using your programming skills.
Do you want to learn how Traffic lights works or you want to make it more intelligent? Now you can make your own intelligent traffic light using PiTraffic. Make your traffic management system and learn to programme to control traffic lights.
Components required:
Right source to buy?
Are you planning to begin your new project and finding the products for it? Rely on SB Components Ltd as it is an ideal destination to buy the best products without placing any burden on your pocket. The Company is offering a vast range of products that range from accessories to stylish and robust Raspberry Pi Cases, Raspberry Pi 3 Cases for your elegant Raspberry Pi. In addition to this, SB components is specialized in designing bespoke cases as well as our team can handle electronic component projects. So, explore the website sb-components.co.uk to choose the product of your choice that you can buy by placing your order online.
The PiTraffic is a low cost hardware Shield designed to allow Raspberry Pi products users to take their first steps into interfacing with the real world. Designed with the learning in mind, everyone will recognise and identify its familiar elements encouraging their use along-side their own projects.
Features
4 Stand with three lights
Four Indivals Stands