ZERO2GO OMINI: Multi-Channel Power Supply for Raspberry Pi

£20.99 GBP

Description The ZERO2GO OMINI is a pHAT sized, auto-switching power supply extension board that allows you to power your Raspberry Pi from a wide range of possible inputs such as a power...

Ask a Question
Need Customization
Volume Pricing
Item Code: SKU09985
Description
Description

The ZERO2GO OMINI is a pHAT sized, auto-switching power supply extension board that allows you to power your Raspberry Pi from a wide range of possible inputs such as a power bank, solar panel or car battery. Compatible with all Raspberry Pi models that are equipped with the 40-pin header; including the A+, 3B+ and Zero models.

Features
  • Three separated input channels (each accepts 3.5~28V DC).
  • Auto step-up or step-down to output 5V for powering Raspberry Pi.
  • Auto switch input channel (one with highest voltage takes the priority).
  • Gracefully turn on/off Raspberry Pi with single tap on the button.
  • Fully cuts power for Raspberry Pi and all its USB peripherals after shutdown.
  • Long hold the button to force power cut, when OS loses response.
  • Monitor the input voltage on each channel (via software).
  • Shutdown Raspberry Pi when input voltage below preset threshold.
  • Recover Raspberry Pi when input voltage exceed preset threshold.
Specifications
  • Dimension: 65mm x 30mm x 7.7mm
  • Weight: 12g (net weight)
  • LED Indicator: Three-color LED (red, green and blue)
  • Output: Output 5V (±5%), maximum 2A
  • Operating Temperature: -30℃~80℃ (-22°F~176°F)
  • Storage Temperature: -40℃~85℃ (-40°F~185°F)
  • Humidity: 0~80%RH, no condensing
  • Mainly Used Chips:
    • MCU: ATtiny841
    • DC-DC Bulk: MP4462
    • DC-DC Boost: SDB628
  • Interface:
    • Micro USB female connector for input channel A.
    • 54-2P connector for input channel B.
    • Universal wire connector for input channel C.
    • 20×2 header (h=2mm) for connecting Raspberry Pi.
  • Input:
    • Three separated channels (A, B, and C)
    • All accept DC 3.5V~28V
    • (5.5~7.0V is not recommended as the DC-DC bulk converter needs more dropout to work well)
  • Efficiency:
    • Up to 87% @ Step-Up mode
    • Up to 82% @ Step-Down mode
  • Standby Current:
    • ~0.13mA @ Vin=3.5V
    • ~0.36mA @ Vin=12V
    • ~0.87mA @ Vin=28V
Kit Content
  • 1 x Zero2Go Board
  • 4 x 4mm Plastic Spacer
  • 4 x M2.5 x 10mm Plastic Screws
  • 4 x M2.5 Plastic Nuts
Reviews