Barcode HAT

$64.00

The Barcode HAT is a sturdy and tiny barcode scanner board with a DE2120 scanner module, buzzer, 1.14" LCD screen, and a micro-USB port. It is intended to scan and decode 20...

Description

The Barcode HAT is a sturdy and tiny barcode scanner board with a DE2120 scanner module, buzzer, 1.14" LCD screen, and a micro-USB port. It is intended to scan and decode 20 different barcode symbologies (both 1D and 2D) using an onboard camera and image processing to detect and decode everything from UPC codes to QR codes.

The module also has two LEDs, one for illumination and the other to project the red line observed on laser scanners along with a scanning button for manual operations. The simplicity of this barcode HAT lets users readily explore all of the DE2120's functionalities without having to deal with bulky cords. Suitable driving circuits operate a buzzer, a push-button tactile switch, and a status indicator. To configure the module, utilize the serial interface or command barcode scanning. For all keyboard, HID, and serial data, data may be sent via the micro USB connector or the UART line. To read barcodes, this device may be set manually or by programming.


  • DE2120 Scanner Module
  • Scanning - Button for manual scanning or program for scanning through software
  • Reads 20 different symbologies
  • Communication ports – Micro USB and UART
  • On-board buzzer
  • Communication ports – Micro USB and UART
  • 1D Symbologies
  • UPC-A
  • UPC-E
  • EAN-8
  • EAN-13
  • Code 128
  • GS1-128
  • Code 39
  • Code 93
  • Code 11
  • Interleaved 2-of-5
  • Matrix 2-of-5
  • Industrial 2-of-5
  • Codabar
  • MSI
  • GS1 DataBar
  • Datalogic 2-of-5
  • 2D Symbologies
  • QR Code
  • Data Matrix
  • PDF 417
  • Micro PDF 417
  • Aztec Code

Resources:

Box Content

  • 1 x Barcode HAT

Reviews

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Robert Pratt
NPS score:
0 (Not at all likely)
10 (Extremely likely)
Likes: Its simplicity, and the amount of different codes it can read
Improvements: Software and drivers
Barcode reader

We have tested the reader using the usb serial port and works very well, however we would like to use it reading through the raspberry pi GPIO. We are still in communication with SB components regarding this and the operation of the onboard display. This unit is good for low speed single scan operations and reads QR codes as well as barcodes. It would not be suitable for production line high speed reading.