Products

Servo Driver HAT for Raspberry pi

16 Channel 12-bit Servo Driver - I2C Interface Module, Servo Driver HAT for Raspberry Pi

£14.99 GBP
16 Channel Servo Driver HAT for Raspberry Pi is a servo driver HAT from which one can control up to 16 servos simultaneously. If you're building a robot with a...
170 Tie Points Mini Solderless Prototype Breadboard

170 Tie Points Mini Solderless Prototype Breadboard

£1.49 GBP£10.99 GBP
Solderless breadboards are a simple way to quickly prototype and set up your projects.  This universal high-quality solderless breadboard features 170 tie points with 0.1" pin spacing.  It is 3.5 cm x 4.5...
1D 2D CMOS DE2120 Barcode Scanner Sensor

1D 2D CMOS DE2120 Barcode Scanner Sensor

£29.99 GBP
The DE2120 is one of the coolest little barcode scanners we've ever seen. This tiny "scan engine" will read 20 different barcode symbologies — both 1D and 2D! This is...
1x20 Female Pin Header Berg Connector, Black

1x20 Female Pin Header Berg Connector, Black

£1.25 GBP£4.99 GBP
A female header pin is a type of electrical connector consists of rows of holes. The pins are inserted into PCB or other board to prevent damage to wires and...
1x20 SMT Female Berg Connector 2.54mm SMT Header Strip

1x20 SMT Female Berg Connector 2.54mm SMT Header Strip

£1.99 GBP£5.99 GBP
It is a 2.54mm 1x20 Pin Female Single Row SMT Header Strip. It has one row of 20 pins. Ideal for surface mounting, where space is a constraint. Specifications: Pitch:...
1x40 Pins Male Berg Strip Connector Header Pin

1x40 Pins Male Berg Strip Connector Header Pin

£1.00 GBP
Male header pin is a type of electrical connector consists of rows of the male connector. The pins are inserted to PCB or other board to prevent damage of wires...
1x40 Pins Male Berg Strip Connector Header Pin (Pack Of 5)

1x40 Pins Male Berg Strip Connector Header Pin (Pack Of 5)

£4.00 GBP
Male header pin is a type of electrical connector consists of rows of the male connector. The pins are inserted to PCB or other board to prevent damage of wires...
2 Pin Jumper Connector 2.54mm Standard Mini Jumper Cap

2 Pin Jumper Connector 2.54mm Standard Mini Jumper Cap

£0.99 GBP£10.99 GBP
Jumper Cap is used for controlling the settings of your internal devices and motherboards.This Short Circuit Connection Cap is widely used on Hard Drives, Circuit boards, and Computer Interface cards....
2-DOF Pan-Tilt HAT for Raspberry Pi

2-DOF Pan-Tilt HAT for Raspberry Pi

£17.99 GBP
Overview This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL25911FN ambient light sensor, it allows the Pi to control the camera movement...
2.0" TFT LCD Display

2.0" TFT LCD Display

£11.99 GBP
Introducing our 2.0" LCD Display - the perfect solution for small-scale display needs. This LCD display boasts a compact size of 2 inches and features a normally black display mode...
2.13inch 212x104 Resolution E-Ink Display HAT for Raspberry Pi (Red/Black/White Color)

2.13inch 212x104 Resolution E-Ink Display HAT for Raspberry Pi (Red/Black/White Color)

£15.99 GBP
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with an embedded controller, communicating via SPI interface, supports Red, Black, and White three-color display. Due to the...
2.4GHz Linear Dipole Antenna U.FL IPX Connector

2.4GHz Linear Dipole Antenna U.FL IPX Connector

£2.99 GBP£12.99 GBP
2.4GHz linear dipole antenna U.FL IPX connector is an Omni-directional antenna, perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into...